Festo VT32 Series, Руководство пользователя

Страница: 15 / 150

Contents and general instructions
XIII
Festo P.BE−MPA−EN en 0302NH
The following product−specific terms and abbreviations are
used in this manual:
Term/abbreviation Meaning
Exhaust plate Plate for ducted exhaust with connection 3/5
Sub−base Pneumatic manifold sub−base with 4 valve locations, for single−solenoid,
double−solenoid or mid−position valves, with work connections 2 and 4.
Basic components Components (pneumatic interface, MP sub−base, sub−base or supply unit)
on which further components can be mounted (exhaust plates, large sur
face−mounted silencer, valve plate or blanking plate).
CPX modules Common term for the various modules which can be incorporated in a CPX
terminal
CPX terminal Modular electric terminal type 50
I/O input/output modules
Electronic modules Module in the sub−base with LED and coil management
End plate Extreme right−hand plate of the MPA valve terminal and extreme left−hand
plate of the CPX terminal with holes for fitting onto a wall
Manual override Manual override
Components Common term for pneumatic interface, MP sub−base, exhaust plate, large
surface−mounted silencer, pneu. sub−base, supply unit, end plate, valve
plate and blanking plate
MP connection Electric multipin connection
MP sub−base Base with electric multipin connection and pneumatic connections
MPA1 Designation of the MPA valve terminal with 10mm−wide valve plates
MPA valve terminal M odular P erformance S ub−base valve terminal (type 32) with MP connec
tion or for CPX terminal
MPA valve terminal with
multipin connection (MP
connection) MPA valve terminal variant with sub−D plug via which all valve solenoid coils
are centrally connected.
Pneumatic interface The pneumatic interface is the interface between the modular
electrical periphery of the CPX terminal and the MPA pneumatics.