Festo VT32 Series, Руководство пользователя

Страница: 121 / 150

5. Maintenance and conversion
5−29
Festo P.BE−MPA−EN en 0302NH
Fitting Proceed as follows:
1. Fit the new sub−base and, if necessary, a further supply
unit (see section Fitting sub−bases").
2. Fit the valve plates or blanking plates onto the empty
valve locations (see section Fitting valve plates or blank
ing plates").
3. Fit the MPA valve terminal onto the fastening surface (see
chapter 2 Fitting onto a wall" or Fitting onto a hat rail").
4. Then fit the pneumatic and electrical connections (see
chapter 3 Installation, connecting the MPA valve ter
minal").
Please note
If a sub−base is inserted between existing sub−bases, the
address assignment of all the valves to the right of the
inserted sub−base will be modified.