Festo MPA-L Series, Описание

Страница: 47 / 160

2. Mounting
2−7
Festo P.BE−MPAL−EN en 1008NH
1
H−rail
2
MPA−LConnection
blocks
3
Vertically rotated
clamping compo−
nent of the H−rails
clamping units
1
2
3
(A)
Fig.2/2: Rear view: Fitting the valve terminal MPA−L onto a H−rail
Additional information on H−rail mounting of the valve
terminal MPA−L with CPX terminal can be found in the
CPX system description.
Dismantling Proceed as follows:
1. Loosen the retaining screw of the H−rail clamping unit
(for position of the screws, see Tab.2/1). Make sure that
the clamping components are horizontal to the H−rail.
2. Swing the valve terminal MPA−L forwards from the H−rail
(see Fig.2/3, arrow A).
3. Lift the valve terminal MPA−L off the H−rail (see Fig.2/3,
arrow B).