Festo MPA-L Series, Описание

Страница: 131 / 160

A. Technical appendix
A−3
Festo P.BE−MPAL−EN en 1008NH
A.1 Technical data
Note
The valves can be used at temperatures down to −5 °C.
In order to prevent the condensate and the humidity from
freezing, we recommend that you fit a dryer with which
condensate and humidity can be removed.
General information
Permitted temperature range
Long−term storage
Operation
Medium − 20 ... + 40
o
C
− 5 ... + 50
o
C
− 5 ... + 50
o
C
Protection class to EN 60 529 IP65 (with IP65 cover and cable from
the Festo accessories)
Relative air humidity 90% at 40
o
C
Mounting position
H−rail mounting
Wall mounting only horizontal
required, but: observe Tab.A/2
Tightening torque (M
A
in Nm)
Left−hand end plate, multipin sub−base
Printed circuit board in end plate
IP40 cover
Screw−type lock (UNC bolts)
IP65 cover
Blanking plugs, M20
Cable connector, straight/side
Pneumatic supply plate
Flat plate silencer with cover
Exhaust plate
Sub−base
Valve
Right−hand end plate
Selector plate, round
Selector plate, square
Tie rod
Threaded rod/sleeve, screw
0.5 ±10%
0.6 ±10%
0.5 ±10%
1.2 ±10%
1.2 ±10%
3.0 ±10% / 2.2 ±10%
1.3 ±10%
1.0 ±10%
0.25 ±20%
3.5 ±10%
2.2 ±10%
1.7 ±10%