Festo CPX-FB37, Перевод оригинальной инструкции

Страница: 61 / 88

5 Diagnostics
Festo – P.BE-CPX-FB37-EN – 1406NH – English 61
5.2.4 EtherCAT-specific LEDs
Run – EtherCAT operating status (communication status)
LED (green) Sequence Status Significance / error handling
LED
not illuminated
ON
OFF
Init Bus node is in the Init status (normal
state after switch-on or after a restart
or reboot).
LED flickers
ON
OFF
Bootstrap Bus node is in the correct status to
receive a firmware update.
A firmware update is received.
LED flashes
ON
OFF
Pre-operational Bus node is in the Pre-operational
status (configuration of the EtherCAT
network).
LED
flashes 1 ×
1)
ON
OFF
Safe-operational Bus node is in the safe-operational
status (e.g. due to a network fault).
Only the input signals (e.g. sensor
data) are updated. Outputs and valves
remain in the current state (signal is
“frozen”).
LED illuminated
ON
OFF
Operational Bus node is in the Operational status
(normal operating status).
1) A singular brief flash (1 x flash, pause, 1 x flash, etc.) is designated a single flash.
Tab. 5.7 LED display “Run”