Festo CPX-AP-I-4IOL-M12, Инструкция по эксплуатации

Страница: 13 / 30

AP parameter
ID Parameter Instance-
s Data
type Access
1)
Arraysize
246 Fieldbus serial number 1 UINT32 ro
–
791 Product key 1 CHAR ro 12
960 Firmware version 1 CHAR ro 40
20000 Module code 1 UINT32 ro
–
20085 Measured value temperature AP-ASIC [°C] 1 INT16 ro
–
20087 Current measured value of logic supply PS
[mV] 1 UINT16 ro
–
20088 Current measured value of load supply PL
[mV] 1 UINT16 ro
–
20090 IO-Link variant
–
8201: variant 8 (factory setting)
– 8205: variant 8 OE
– 8206: variant 2
– 8207: variant 2 OE
– 8208: variant 4
– 8209: variant 4 OE
– 8210: variant 16
– 8211: variant 16 OE
– 8212: variant 32
– 8213: variant 32 OE
1 UINT16 rw
–
20093 Hardware version 1 UINT8 ro
–
20097 Activation of the sensor supply
(factory setting TRUE) 1 BOOL rw
–
1) ro = read only; rw = read write
Tab. 13 AP parameter
10 Diagnostics and fault clearance
10.1 Diagnostic messages
Diagnostic messages of an IO-Link device are sent to the IO-Link master via event codes. The event
code is mapped in the IO-Link master to a diagnostics ID
è
10.3 Event codes.
Information on grouping and displaying the diagnostic messages è Instruction manual for the auto-
mation system CPX-AP.
Diagnostics and fault clearance
13 Festo — CPX-AP-I-4IOL-M12 — 2020-03