Festo CPX-AP-I-4IOL-M12, Инструкция по эксплуатации

Страница: 10 / 30

8.1 Address space (data length inputs/outputs)
The address space (data length inputs/outputs) provided by the module can be set using software.
The following variants for setting the address space (data length inputs/outputs) are possible:
Module [byte] per port [byte] Variant Module code
(hex/dec) Supported
network
1)
Inputs
2)
Outputs Inputs Outputs
2 0x200E/8206 PB, EP, EC
2_OE 0x200F/8207 PN, EP
12 8 2 2
4 0x2010/8208 PB, EP, EC
4_OE 0x2011/8209 PN, EP
20 16 4 4
8
3)
0x2009/8201 PB, EP, EC
8_OE 0x200D/8205 PN, EP
36 32 8 8
16 0x2012/8210 PB, EP, EC
16_OE 0x2013/8211 PN, EP
68 64 16 16
32 0x2014/8212 PB, EP, EC
32_OE 0x2015/8213 PN, EP
132 128 32 32
1) PB = PROFIBUS; PN = PROFINET; EP = EtherNet / IP; EC = EtherCAT
2) The last 4 input bytes contain the IO-Link port qualifier information bytes for port 0 … 3.
3) Factory setting
Tab. 10
The "IO-Link Device Tool" software can be used to set the address space (data length inputs/outputs)
è www.festo.com/sp.
The setting is saved permanently in the module. Changes only become effective after a restart of the
automation system CPX-AP.
8.2 IO-Link Device description file (IO-Link Device Description)
IO-Link Device information can be imported into the module via an IO-Link device description file.
The "Festo IO-Link Tool" software can be used to import the IO-Link device description file
è
www.festo.com/sp.
9 Parameterisation
Various parameters are available for reading out information about the modules in an automation sys-
tem CPX-AP and adapting the modules to the application situation.
Parameterisation
10 Festo — CPX-AP-I-4IOL-M12 — 2020-03