Festo CPV...-GE-CO3-8 series, Электронное руководство

Страница: 92 / 143

3. Diagnosis and error treatment
3-14
Festo P.BE-CPV-CO3-EN en 1201a
Index 1002 (Manufacturer Status Register)
Index
1001
Byte 0
Overview
of faults
Byte 1 Byte 2 Byte 3 Byte 4 Byte 5 Byte 6 Byte 7
Error code Reserved
Fault
detail Condition
Status Error
register Source
of fault
Bit Meaning Explanation
0 Fault in the CP system Display of configuration fault, short circuit or failure
1 CPI-string short-circuited Short circuit
2 CPI string extension 3 failed Failure
3 CPI string extension 4 failed Failure
4 Common fault Read out byte 2 of the Emergency Message (see Tab. 3/8).
5 res.
6 CPI string configuration fault
(actual ≠ saved), or
non-permitted extension
(e.g. > 4 module) The actual configuration does not correspond to the set
configuration
7 Extended diagnosis
(see Object 3200) With new diagnostic numbers from the CPI, e.g. cable
fracture (diagnostic number can be read via its own
object.)
bold = Bit is used by CPV Direct
Tab. 3/9: Byte 0 of the Manufacturer Status Register (overview of faults)