Festo CMXR-C2, Сборка и инструкция по установке

Страница: 29 / 61

2. Assembly
Festo GDCP-CMXR-C2-HW-EN 1002NH 29
The multi-axis control system CMXR is attached onto a DIN mounting rail (TS 35 x 7.5
H-rail). Mount the device in such a way that there is still sufficient space for heat
dissipation and the permissible temperature range is maintained.
1 H-rail fixture
2 H-rail locking
lever
3 H-rail
Fig. 2.7 H-rail mounting
This is how you attach the device to the H-rail:
1. Pull out all H-rail locking levers (unlock).
2. Slightly tilt the device and place it onto the H-rail, on the H-rail fixture.
3. Press the lower half of the device onto the H-rail.
4. Lock all H-rail locking levers one after the other (see Fig.).
5. Secure the device with end supports (device end terminals) (see the following
section).
Securing with end supports (device end terminals)
To safeguard the modules from slipping or shaking loose due to vibrations, attach an
end support to the H-rail on both the right and left sides.
1
2