Festo CMXR-C2, Сборка и инструкция по установке

Страница: 26 / 61

2. Assembly
26 Festo GDCP-CMXR-C2-HW-EN 1002NH
2.3 Guidelines for the installation
The device is intended to be installed into a control cabinet in a horizontal position. Take
the wiring for the device into consideration prior to assembly. Keep the device away from
cables with high levels of interference. Leave sufficient space for the wiring and cooling
system.
Mounting dimensions and mounting clearances
A clearance of 50 mm, above and below the modules, must be maintained for the air
circulation.
The depth of the module is 100 mm. In determining the required control cabinet depth,
the height of the plug connectors plus an additional 20 mm approx. must be taken into
account.
H1: 121 mm L1: 270 mm
H2: 72 mm L2: 22.5 mm
H3: 50 mm L3: 10 mm
L4: 4 mm
Fig. 2.5 Dimensions and mounting clearances
Air-conditioning and ventilation
The upper and lower sides of the module are equipped with ventilation slots for heat
dissipation. When the permissible ambient temperature is maintained there is no need for
an external fan. It is, however, absolutely vital that the ventilation slots are kept clear.