Festo CMXR-C2, Сборка и инструкция по установке

Страница: 24 / 61

2. Assembly
24 Festo GDCP-CMXR-C2-HW-EN 1002NH
This is how you assemble the peripheral modules:
1. Switch off the operating and load voltage supplies.
2. Remove the bus plug's right-hand side plate from the device (see Fig.).
Caution
If handled incorrectly the pins on the bus plug can bend.
Proceed with care when assembling the peripheral modules.
3. Carefully insert the peripheral modules until the upper and lower mechanical locking
mechanisms engage.
4. To assemble further peripheral modules, repeat steps 2 and 3.
1 Cover (on the
right-hand side)
2 Bus plug
3 Upper
mechanical locking
mechanism
4 Lower
mechanical locking
mechanism
Fig. 2.3 Assembling a peripheral module
2.2.3 Dismantling peripheral modules
This is how you disassemble the peripheral modules:
1. Switch off the operating and load voltage supplies.
2. If necessary, remove the device from the H-rail (for disassembling the device, see
section 2.5).
3. Carefully press (unlock) the upper and lower mechanical locking mechanisms on the
left (see Fig.).
3
2
4
1