MACHINES AND
ACCESSORIES
Page 8 of 55
Al
lr
ig
ht
s
ar
e
re
se
rv
ed
of
re
pr
od
uc
tio
n
an
d
di
ss
em
in
at
io
n
of
th
is
Te
ch
ni
ca
lM
an
ua
la
nd
do
cu
m
en
ta
tio
n
ci
te
d
an
d/
or
at
ta
ch
ed
.I
ti
s
ex
pr
es
sl
y
fo
rb
id
de
n
to
re
pr
od
uc
e,
pu
bl
is
h
or
di
st
rib
ut
e
an
y
in
fo
rm
at
io
n
fr
om
th
is
M
an
ua
l.
Co
py
rig
ht
by
FE
RV
I
7. Make sure that the work environment is forbidden to children, non-employees and
animals.
8. Do not perform tasks on the machine other than those for which it was designed. Only
use the machine in the manner in which it was intended, as described in this instruction
manual.
9. Work without disturbances.
10.Work areas must be well lit.
11.Always wear eye protection and protective gloves while working. If dust is produced,
use the appropriate masks.
12.Wear appropriate clothing. Loose clothing, dangling jewellery, long hair, etc.., can get
caught in the moving parts, causing irreparable injury.
13.Replace worn and/or damaged parts, check that the guards and protection devices work
properly before operating. If necessary, have the machine checked by the service
support personnel. Use only original spare parts.
14.
Cut the mains voltage supply to the machine when:
the machine is not being operated;
is left unattended;
you are performing maintenance or adjustment because the machine does not
work properly;
the power cable is damaged;
you are replacing its tool;
in case the machine is being moved to another location;
you are cleaning the machine.
15.Do not use the machine in areas with a risk of fire and/or explosion.
16.It is recommended that users of this publication, for maintenance and repair, have a
basic knowledge of mechanical principles and of repair technique procedures.
17.
The person responsible for company safety is to make sure that the staff
responsible for using the machine have read and understood this manual in its
entirety.
18.
The company safety manager is responsible for monitoring the company's risk
status according to Legislative Decree no. 81/08.
2.2 Special safety rules for planers
1.
The use of accessories or devices other than those recommended in this instruction
manual and may pose a risk to the safety of the operator.
2.
Repairs may only be carried out by qualified and authorised personnel.
3.
Do not use the machine if the protection devices are not in their designated position
and correctly adjusted.
4.
Do not use blades which are not sharpened because this increases the risk of rejection
(return back) of the workpiece.
5.
Each section of the cutting / cutter block which is not used for planing, should be
protected.
6.
When planing short and narrow pieces, use a tool to push it.
7.
Do not use the machine to make grooves.
8.
The effectiveness of the workpiece anti-rejection device and the feed roller should be
checked periodically.
fervi.com