Ferris CCW36 Series, Руководство оператора

Страница: 21 / 52

19
Figure 6. Belt Positioning for Cutting Range
A. Deck Drive Belt Positioned for Lower Cutting Range
B. Deck Drive Belt Positioned for Upper Cutting Range
A
B
To Adjust the Cutting Height:
The cutting range must be adjusted to the correct range
before the cutting height can be adjusted. The cutting
height indicators will help you identify the cutting height.
1. Pull the cutting height adjustment handle ( A, Figure 8 )
up and out of the handle lock position ( B ) and crank the
handle clockwise to raise the deck to the desired cutting
height. Crank the handle counter-clockwise to lower
the deck to the desired cutting height. After the desired
cutting heights are achieved position the cutting height
adjustment handles into the handle lock position.
2. Repeat the process for the other side of the machine.
NOTE: Both sides of the cutter deck must be adjusted to the
same height to insure a proper cut.
Figure 7. Mower Deck Belt Routing
A. Adjustable Center Pulley
B. Mower Deck Belt
C. Idler Pulley
D. Left Spindle Pulley
E. Stationary
Idler Pulley
A
C
D
B
Figure 8. Remove the Cutter Deck Guard
A. Cutter Height Adjustment Handle
B. Handle Lock Position
C. Cutting Height Indicator
B
A
C
Rear & Side
Discharge Decks
B
D
D
E
C
Side Discharge
Timed Decks
Operation
Not
for
Reproduction