Ferris CCW36 Series Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 52

Ferris CCW36 Series Скачать руководство пользователя страница 11

9

Operator Safety

8

9

10

CE Models

11

CE Safety Icons

Warning: Read Operator’s Manual

Read and understand the operator’s
manual before using this machine.

Danger: Fire Hazard

Keep the unit free of grass, leaves
and excess oil. Do not add fuel while
engine is hot or running. Stop engine
and allow to cool for at least 3 minutes prior to adding fuel.
Do not add fuel indoors, in an enclosed trailer, garage or
other enclosed areas. Clean up spilled fuel. Do not smoke
while operating this machine.

Danger: Thrown Objects

This machine is capable of thrown
objects and debris. Keep bystanders
away.

Danger: Dismemberment

This mower deck can amputate limbs.
Keep hands and feet away from blades.

Danger: Carbon Monoxide Poisoning

Do not operate the engine in an
unventilated area.

Danger: Machine Rollover

Operating on steep slops can cause
sliding and loss of steering, control
and rollover.

Danger: Dismemberment

This machine can crush and cut. Keep
hands away from belts and pulleys.

Warning: Fire Hazard

Keep children, open flames and sparks
away from the battery, which could
ignite explosive gases.

Warning: Sulfuric acid can cause
blindness or severe burns

Always wear safety goggles or a face
shield when working on or near a
battery.

Warning: Batteries produce explosive
gases.

Read and understand the Operator’s
Manual before using this machine.

Important: Do not discard a battery in
the trash.

Contact local authorities for disposal
and/or recycling of batteries.

*This decal is located on
the battery for CE models
only.

Not

for

Reproduction

«
...
9
10
11
12
13
...
»

Содержание CCW36 Series





















































Отзывы:

Нет отзывов