background image

22

www.ferrisindustries.com

When and How Often to Mow

The time of day and condition of the grass greatly affect the 
results you’ll get when mowing. For the best results, follow 
these guidelines:

 1.  Mow when the grass is between three and five inches 

high.

 2.  Mow with sharp blades. Short clippings of grass one 

inch or shorter decompose more quickly than longer 
blades. Sharp mower blades cut grass cleanly and 
efficiently, preventing frayed edges which harm the 
grass.

 3.  Mow at time of day when the grass is cool and dry. 

Late afternoon or early evening often provide these ideal 
mowing conditions.

 4.  Avoid mowing after rain or even heavy dew, and never 

mulch when the grass is wet (moist grass does not 
mulch well, and clumps beneath the mower deck).

Mowing Patterns

Always start mowing on a smooth, level area.

The size and type of area to be mowed will determine the 
best mowing pattern to use. Obstructions such as trees, 
fences and buildings, and conditions such as slopes and 
grades must also be considered. 

 1.  Cut long straight strips overlapping slightly.

 2.  Where possible, change patterns occasionally to 

eliminate matting, graining or a corrugated appearance.

 3.  For a truly professional cut, mow across the lawn in one 

direction, then recut the lawn by mowing perpendicular 
to the previous cut.

Note: Always operate the engine at full throttle when 
mowing. 

If you hear the engine slowing down, you are mowing 
too fast—using a slower ground speed will improve the 
cutting efficiency of the blades and prevents many common 
cutting problems. Use an appropriate ground speed for the 
thickness and height of the grass you are cutting (3rd gear 
or slower for manual gear models). If you hear the engine 
slowing down you are mowing too fast, use a slower ground 
speed. 

Mowing Methods

Proper Broadcast Mowing

Broadcasting, or side-discharging, disperses fine clippings 
evenly over the entire lawn.  Many golf courses use this 
method. Your mower has a deep dish deck to allow freer 
circulation of clippings so they are broadcast evenly over the 
lawn.

Engine Speed & Ground Speed for Broadcasting

Always operate the engine at full throttle when mowing.  If 
you hear the engine slowing down, you are mowing too 
fast—using a slower ground speed will improve the cutting 
efficiency of the blades and prevents many common cutting 
problems. 

ALWAYS use an appropriate ground speed for the thickness 
and height of the grass you are cutting (3rd gear or slower 
for manual gear models). If you hear the engine slowing 
down you are mowing too fast, use a slower ground speed.

How Much Grass to Cut Off When Broadcasting

Mow when the grass is 3-5 inches long.  Do not cut the 
grass shorter than 2 to 2-1/2 inches.  Do not cut off more 
that 1 inch of grass in a single pass

Where possible, make one or two passes around the outside 
of the area discharging the grass INTO the lawn to keep the 
cut grass off fences and walks.

The remainder of the mowing should be done in the 
opposite direction so that the clippings are dispersed OUT 
onto the area of lawn previously cut.

Operation

Not 

for  

Reproduction

Содержание CCW36 Series





















































Отзывы: