53
Using Navigation
Information during route
guidance
Display destination
information
X
Press the
button.
X
Turn the turn/push control
to the
right until
'HVWLQDWLRQ
is displayed in the
upper right of the display.
The following will be displayed:
• In the upper left the destination city,
town or place and the destination
street.
• The speed averaged thus far on the
lower left under the destination city,
town, or place.
• The distance yet to be covered and the
expected arrival time above the
displayed automobile
• On the left and right of the displayed
automobile the distance covered thus
far and the travel time taken until now.
Display/save position
X
Press the
button.
X
Turn the turn/push control
to the
right until
3RVLWLRQ
is displayed in the
upper right of the display.
The following will be displayed:
• In the left area if possible the city,
town, or place as well as the street or
geographical co-ordinates and the
altitude above sea level (only if
satellite reception is sufficient).
• Above the displayed automobile the
number of the received/receivable
satellites.
2076
Note:
• If an interim destination (stopover) is
active, the information on the interim
destination will be displayed. Above
the automobile,
will be shown on
the display.
• By pressing the turn/push control
the values for average speed, distance
covered thus far and the travel time
needed until now will be reset to zero.
• By extended pressing of the
button you can display the complete
information for the indicated
destination.
• You can leave the destination
information by pressing the
button.
Note:
The position may also be displayed and
saved if no route guidance is active.
2077