Ferrari 2006 F430 Spider, Руководство пользователя

Страница: 59 / 154

2 - About your vehicle
59
Seat belts
If used correctly, the seat belts, in
combination with the pretensioners and the
load limiting devices, are designed to help
protect the occupants from various types
of impacts by fi rmly securing them to the
vehicle structure.
Ferrari recommends you use the
seat belts correctly fastened and
adjusted at all times!
Correct use of the seat belts can reduce
the risk of serious injury in the event of an
accident or if the vehicle overturns.
The seat belts are automatic, with 3
attachment points, and an emergency
inertia locking device fi tted with
pretensioner and load limiting device.
For maximum protection, keep the backrest
in the upright position, rest your back
comfortably against it and adjust the seat
belt height so that it fi ts tightly across your
chest and pelvis area.
Fastening the seat belts
After properly adjusting the seat and
headrest:
• Grip the buckle
A , slowly pull the belt
and insert the hooking tongue into the
buckle B (if the belt locks while you are
pulling it out, let it wind back briefl y and
pull it out again without jerking).
• Make sure that it has clicked into the
locked position.
• Position the seat belt correctly.
�
�
If the driver’s seat belt is not fastened, when
you turn the ignition key to position II ,
the warning light on the instrument panel
illuminates and a buzzer sounds for 7.5
seconds.
Do not use any devices (e.g., clips, catches,
etc.) that hold the seat belt away from your
body.
Do not allow a child to sit on the
passenger’s lap with both of them
fastened with the passenger’s seat belt.
Unfastening the seat belts
• Push the release button
E
.
• Guide the belt hooking tongue
A
back to
its rest position.
�
�