102
• Completely remove the fi ve stud bolts
and remove the wheel.
• Fit the spare wheel and tighten the fi ve
stud bolts.
• Lower the vehicle and remove the jack.
• Fully tighten the stud bolts, alternately
going from one stud bolt to the
diagonally opposite one in the order
shown in the fi gure.
• As soon as possible, secure the stud bolts
with the torque wrench, tightening them
to a torque of 74 ft. lbs. (100 Nm).
Replacing a bulb
Front lights
Low beam/high beam
Position light
Front direction indicator
Side direction indicator
Side Marker
1
3
4
2
5
Before replacing a bulb, always disconnect
the battery (see
page 122
) and check that the
corresponding fuse is intact.
When reconnecting the battery, follow the
procedure described on
page 122
.
The spare wheel is not fi tted with a tire
pressure monitoring sensor (see the label
on spare wheel bag). Therefore, after fi tting,
the wheel is not monitored by the system,
however, it complies with International
Regulation
ECE R64/01
. Once fi tted,
we recommend you go to the nearest
Authorized Ferrari Dealer
.
After removing the spare wheel, put
the tools and the replaced wheel
back into the luggage compartment.
Содержание 2006 F430 Spider
