Fermax IP-Fermax IPF-00, Инструкция по установке и эксплуатации

Страница: 35 / 79

IP VarioBell
- installation and operating instructions 35
Account - unit name in SIP protocol (usually line number or name without
diacritics)
Auth.ID - name for SIP server registration
Password - password for SIP server registration
Send register
– when registration is necessary (mostly yes) then this parametr
must be used
Registration server - IP adress or server name of registration server (in most
systems and installations is enough to insert IP adress).
Registration is performed on this server. When you dont mark send
registration then dont fill
Registration server and IP adres sof SIP
server write to Proxy server .
Port - SIP port is usually 5060 or 5061
Expiration[sec]
–
expiration of SIP server registration (period of registration
request repeated sending)
Registrate after restart
–
when you mark then allways during restart will be
unregistrated
SIP server - IP adress or server name. Over this server connection is made.
When is not filled then connection makes on Registration server
(but you must mark Send registration )
Port - SIP port is usually 5060 or 5061
Outbound proxy - IP adress or proxy name where is determine where will be
sends door entry requests. If outbound proxy is setup will be
INVITE regest sends to outbound proxy adress. Outbound proxy is
used due NAT. When is not used dont fill up.
Port - SIP port is usually 5060 or 5061
SIP Transport - TCP or UDP, or automatic selection
Provisional code
– determine if during ringing will be sends SIP code „180
Ringing“ or „183 Session progress“
Enable symetric RTP - by mark is ON. It means that door entry will not sends
by itself audio to RTP called party, but wait for called party to send
RTP. After sends data to same adress:port from which message
arrived. It is trick used for bridging NAT
Registration status display on page as visible on picture.