42
Use the ENCODER to scroll to and select the “category” setting, shown in the DISPLAY WINDOW as “1.STMP
2.MOD 3.DLY”, then press the MENU utility button to return to the active preset:
The GTX-7 Footswitch has now assigned Stompbox effects to FUNCTION button FX1, Modulation effects to FX2,
Delay effects to FX3, Reverb effects to FX4 and Pitch effects to FX5; each can be turned on and off by
stepping on its designated FUNCTION button. Note that Mustang GTX will “remember” EFFECTS mode settings
after turning the amplifier off and back on again; in order to return to the default “first five” setting previously
described, repeat the steps in this section and select the “FIRST 5 (DEFAULT)” menu option in the final step.
LOOPER MODE
LOOPER mode enables the user to record loops up to 60 seconds long and overdub subsequent parts. Any
number of overdubbed parts can be layered over the original recorded part; however, only the
last
overdub
created can be undone. To record a loop, step on the MODE button (
green arrow in illustration below
) until
“LOOPER” mode is activated; the MODE LED directly to the right of the label “LOOPER” will illuminate in green
(
see illustration below
).
To begin recording the first musical passage, step on FUNCTION button 1 (
yellow arrow in illustration below
)
labeled “REC” for this purpose. The red FUNCTION LED above the button will begin flashing and the DISPLAY
WINDOW will show “REC,” indicating that the LOOPER is in recording mode; play a passage of any time dura-
tion up to 60 seconds (
see illustration below
).
When finished playing the first musical passage, stop recording and start playback by stepping on FUNC-
TION button 3 (
yellow arrow in illustration on next page
), labeled “PLAY”. The red FUNCTION LED above FUNC-
TION button 1 will stop flashing, the red FUNCTION LED above FUNCTION button 3 will illuminate, and the
DISPLAY WINDOW will indicate playback by showing “PLA” (
see illustration on next page
). To stop playback,
step on FUNCTION button 4, labeled “STOP” (
green arrow in illustration on next page
); the DISPLAY WINDOW
will show “STP” (
not shown in illustration
).
MENU
FIRST 5 (DEFAULT)
1.STMP 2.MOD 3.DLY
