There are two modes for BPM—”global” and “preset”. “Global” mode applies a single BPM to all presets. In
“preset” mode, each preset has its own BPM, which can be set individually per preset (the default rate is 120
BPM). To switch from one BPM mode to the other, press the bottom LAYER BUTTON corresponding to “mode:
preset” or “mode: global” in the DISPLAY WINDOW; turn the ENCODER to adjust the BPM rate:
SETTING NOTE DIVISIONS
To synch an effect to the BPM rate, the user can set a specific “note division” for modulation and delay effects.
When the note division is set, the time value is automatically calculated to fit with the current BPM setting. If
the time parameter is changed, the note division is automatically set to “off”.
Note divisions values are off, whole note, half note, dotted half note, half note triplet, quarter note, dotted quar-
ter note, quarter note triplet, eighth note, dotted eighth note, eighth note triplet, sixteenth note, dotted six-
teenth note, sixteenth note triplet, thirty second note, dotted thirty second note and thirty second note triplet.
To set note divisions, go to the CONTROLS LAYER of the selected modulation or delay effect by pressing the
corresponding bottom LAYER BUTTON. Use the ENCODER to scroll to and select “NOTE DIVISION” (abbreviat-
ed “DIV”); then turn and press the ENCODER to select a note division value:
If all note divisions are off, BPM will correspond to rate of last delay or modulation effect in the signal path.
23
TAP TEMPO
133 bpm
TAP
mode: global
back
BLACK HOLE VIBE
’59
BASSMAN
VIBRA-
TONE
POST FX 1
69
LEVEL ROTOR
DEPTH FDBK PHASE
5.67
Hz
NOTE DIVISION
OFF
BLACK HOLE VIBE
’59
BASSMAN
VIBRA-
TONE
POST FX 1
69
LEVEL ROTOR
DEPTH FDBK PHASE
5.67
Hz
NOTE DIVISION
1/8
