Felder Hammer HNC 47.82, Перевод оригинальной инструкции по эксплуатации

Страница: 25 / 63

HNC 47.82
25
Transport, packaging and storage
Environmental protection
Packaging materials are valuable raw materials and in many cases they can be
used again, reprocessed or recycled.
ENVIRONMENT
Dispose of the packaging in an environmentally friendly manner
− Dispose of the packaging materials in an environmentally
friendly way and always in accordance with local waste dis-
posal regulations.
− Contract a recycling company.
It is recommended to store the packaging and transport locks,
once removed. If, due to any defects, the machine has to be
returned to the manufacturer then the original packaging and
transport locks should be used.
7.5 Storage
Keep items sealed in their packaging until they are assembled/installed and be
sure to observe the stacking and storage symbols on the outside of the packaging.
Storage conditions
● Do not store outdoors.
● Store in a dry and dust-free environment.
● Do not expose to aggressive substances.
● Protect from direct sunlight.
● Avoid mechanical vibration.
● Storage temperature: –10 bis +50 C.
● Maximum humidity: 60 %.
●
Avoid extreme temperature fluctuations (condensation build-up).
●
Apply a coat of oil to all exposed machine parts (corrosion protection).
●
When storing for longer than 3 months, apply a coat of oil to all exposed
machine parts (corrosion protection). Regularly check the general condition
of all parts and the packaging. If necessary, refresh or re-apply the coat of
anti-corrosive agent.
● If the machine is to be stored in a damp environment, it must be sealed in
air-tight packaging and protected against corrosion (desiccant).