Felder Hammer HNC 47.82, Перевод оригинальной инструкции по эксплуатации

Страница: 20 / 63

20
Technology Data
The specified values are emission values and therefore do not represent certain
workplace values. Although there is a correlation between emission and immis-
sion levels, it is not possible to state whether increased safety measures are
required. Factors which can considerably influence the present immission level at
the workplace include the duration of exposure, the character of the working area
and other influences in the neighbouring area. Acceptable workplace values may
also vary from country to country. However, this information should help the user
to better assess the hazards and risks. Depending on the location of the machine
and other specific conditions, the actual noise emission values may deviate signifi-
cantly from the specified values.
Machine (without tool)
Idle
Noise level 65 dB (A)
Measurement tolerance 5 dB (A)
Machine with HF motor
This measurement was taken whilst the machine was idling without tool.
Idle
Noise level 82 dB (A)
Measurement tolerance 5 dB (A)