Feig Electronic OBID i-scan ID ISC.ANT1300/680-A, Руководство по установке

Страница: 6 / 50

OBID i-scan
®
Installation ID ISC.ANT1300/680-A
FEIG ELECTRONIC GmbH Page 7 of 50 M71104-1e-ID-B.doc
2 Performance Features of the ID ISC.ANT1300/680 Antennas
The ID ISC.ANT1300/680 Type A antenna is the version with dynamicTuning Board ID ISC.DAT
mounted. The Reader and Power-Splitter or Multiplexer are not included and had to be ordered
separately and then to be mounted into the antenna
Up to
-
two antennas Type A with reader and power splitter or multiplexer as a single gate,
-
three antennas Type A with reader and multiplexer as a double gate, or
- 4 - 8 antennas with reader and multiplexer as a multiple gate
can be operated.
Depending on the antenna configuration, one, two or all three read orientations of the Smart Tags
and various antenna spacing (gate widths) are possible.
The ID ISC.ANT1300/680 Type A is „figure-of-eight“ antenna with tuner and have been optimized
as transmitting and receiving antennas for the ID ISC.LR2000 Reader. It is however also possible
to operate them with other Readers at a transmission frequency of 13.56 MHz and an output
impedance of 50
Ω
. The read ranges indicated in this document and the tuning procedures may
however then vary.
The antennas comprise the electrical antenna conductor, the housing, the ID ISC.DAT Dynamic
Antenna Tuner and the connection cable . The antennas are factory tuned to an impedance of 50
Ω
in a magnetically neutral environment at a distance of 95 cm. When installing in different ambient
conditions the antenna can be retuned using the “DATuningTool“ PC software. After tuning the
antennas will retain their settings as long as the ambient conditions remain unchanged.
The antennas can be used for detecting both product and persons. It is suitable for installation
indoors or outdoors if weather-protected.
2.1 Available Antenna Types
The following Antennas are currently available:
Antenna Type Description
ID ISC.ANT1300/680-A Antenna with dynamic tuning board ID ISC.DAT
ID ISC.ANT-GIK Mounting material and cables
for Reader, Power Splitter or Multiplexer
ID ISC.ANT-GAK Acoustic alarm signal with mounting material
Table 1: Available Antenna Types