OBID i-scan
®
Installation
ID ISC.ANT1300/680-A
FEIG ELECTRONIC GmbH
Page 19 of 50
M71104-1e-ID-B.doc
4.2.4 Configuration of a Gate antenna with power splitter
Connect the components as shown in Fig. 8
Fig. 8: Component connection for a standard Gate Type A with power splitter
The coax cables have fixed lengths and may not be shortened and therefore need to be tied into
small loops (see Fig. 9). Tie all cables as far away from the antenna conductor as possible. The
cables must never be allowed to contact the aluminum tube.
Fig. 9: Tying the cables
X2
X3
X1
3,60m
2 Tuning boards of
antennas ID ISC.ANT1300/680
Power Splitter
ID ISC.ANT.PS-BM
X1
1,35m
X4
Torrid core
Long Range Reader
ID ISC.LRM2000
IN1
X9, Pin1+3
DC Power supply
24V
Pos.1
Pos.2
Pos.4
Pos.8
