Feig Electronic OBID i-scan ID ISC.ANT1300/680-A, Руководство по установке

Страница: 23 / 50

OBID i-scan
®
Installation ID ISC.ANT1300/680-A
FEIG ELECTRONIC GmbH Page 24 of 50 M71104-1e-ID-B.doc
4.2.8 Tuning the Gate Antenna with Power Splitter
Before tuning the Gate Antenna you must quit the ISOStart software. Then the gate may be tuned
according to the following sequence:
Step Action Note
1
Start “DATuningTool”
Software
2
Click on “Detect Reader...”
button and then “Detect” on
the selected interface (COM-
Port 1)
3
Use „Settings“ to enter the
configuration:
Dual Mode,
Number of Gates 1
Number of Tuning Iterations 3
4
Activate „Start Tuning“ and
wait until the tuning process is
ended.
... ...
5
After each tuning pass the
current tuning status is
displayed.
After successful tuning both
antennas for „Gate 1“ are
shown in green.
After successful tuning close the DATuningTool again.