OBID
®
classic-pro
Manual
ID CPR.03.20-CD
FEIG ELECTRONIC GmbH
Page 31 of 40
H60100-5e-ID-B.doc
Buttons:
On the right side the following buttons are visible:
Read ConfigCard:
Reads a ConfigCard Transponder which lays on the configuration reader.
Write ConfigCard:
Writes the current configuration settings into the ConfigCard Transponder which
lays on the configuration reader.
Clear Screen:
Resets the dialog.
Exit:
Leaves the program.
Configuration Dialogs:
The configuration dialogs are dynamical activated or deactivated. Depending on the se-
lected option only the necessary dialogs will be activated. Each input mask represent a
configuration parameter which is described in chapter 5.1. Configuration Parameter.
Please refer to this description to get detailed information about each parameter.
ConfigCard Description
This filed can be used to store a free description with your configuration.
Scan-Data:
Configuration Parameter SCAN-DATA.DATA-SELECTION ((see 5.1. Configura-
tion Parameter)
UID Truncation
Configuration Parameter D_START, D_LGT and D_DIGIT (see 5.1. Configuration
Parameter).
Data Block Definition:
Configuration Parameter DB_ADR, D_LGT and SCAN_DATA.DBO (see 5.1.
Configuration Parameter)
Interface:
Configuration Parameter INTERFACE (see 5.1. Configuration Parameter).
Transponder Driver:
Configuration Parameter
TAG_DRV (see 5.1. Configuration Parameter).
mifare Key:
Configuration Parameter mifare_KEY and TAG_DRV.MK (see 5.1. Configuration
Parameter)