Feider Machines FSOR17210, Руководство пользователя

Страница: 24 / 29

24
13. TROUBLESHOOTING
Fault Possible cause Remedy
Motor does not work
Motor, cable or plug defective, fuses
burnt Arrange for inspection of the machine by
a specialist.
Never repair the motor yourself. Danger!
Check fuses and replace as necessary
The motor starts up
slowly and does not
reach operating speed.
Voltage too low, coils damaged,
capacitor burnt Contact the utility provider to check the
voltage. Arrange for inspection of the
motor by a specialist. Arrange for
replacement of the capacitor by a
specialist
Motor makes excessive
noise
Coils damaged, motor defective Arrange for inspection of the motor by a
specialist
The motor does not
reach its full power.
Circuits in the network are overloaded
(lamps, other motors, etc.)
Do not use any other equipment or
motors on the same circuit
Motor overheats easily. Overloading of the motor, insufficient
cooling of the motor
Avoid overloading the motor while
cutting, remove dust from the motor in
order to ensure optimal cooling of the
motor
Saw cut is rough or
wavy
Saw blade dull, tooth shape not
appropriate for the material thickness
Re-sharpen saw blade and/or use
suitable saw blade
Workpiece pulls away
and/or splinters
Excessive cutting pressure and/or
saw blade not suitable for use
Insert suitable saw blade