Feider Machines FSOR17210, Руководство пользователя

Страница: 18 / 29

18
7.5 PRECISION ADJUSTMENT OF THE STOP FOR MITRE CUT 45°
(FIG.1/2/5/9/10)

No stop angle included.

Lower the machine head (4) and secure it using the locking bolt (23).

Fix the rotary table (14) in the 0° position. Attention! For mitre cuts (inclined saw head), the left side of
the moveable stop rails (16a) must be fixed in the outer position.

Open the set screw (16b) for the moveable stop rail (16a) and push the moveable stop rail (16a)
outwards.

The moveable stop rail (16a) must be fixed far enough in front of the innermost position that the distance
between the stop rail (16a) and the saw blade (6) amounts to a maximum of 8 mm.

The right side of the moveable stop rails (16a) must be in the inner position.

Before making a cut, check that the stop rail (16a) and the saw blade (6) cannot collide.

Loosen the set screw (22) and use the handle (1) to angle the machine head (4) 45° to the left.

45° - position angle stop (B) between the saw blade (6) and rotary table (14).

Loosen the lock nut (27a) and adjust the adjustment screw (27) until the angle between the saw blade
(6) and the rotary table (14) is precisely 45°.

Re-tighten the lock nut (27a).

Subsequently check the position of the angle indicator. If necessary, loosen the pointer (19) using a
Philips screwdriver, set to position 45° on the angle scale (18) and re-tighten the retaining screw.
7.6 MITRE CUT 0°- 45° AND TURNTABLE 0° (FIG. 1/2/11)
The crosscut, drag and mitre saw can be used to make mitre cuts of 0° - 45° in relation to the work face.
Attention! For mitre cuts (inclined saw head), the left side of the moveable stop rails (16a) must be fixed in
the outer position.

Open the set screw (16b) for the moveable stop rail (16a) and push the moveable stop rail (16a)
outwards.

The moveable stop rail (16a) must be fixed far enough in front of the innermost position that the distance
between the stop rail (16a) and the saw blade (6) amounts to a minimum of 8 mm.

The right side of the moveable stop rails (16a) must be in the inner position.

Before making a cut, check that the stop rail (16a) and the saw blade (6) cannot collide.

Secure the set screw (16b) again.

Move the machine head (4) to the top position.

Fix the rotary table (14) in the 0° position.

Loosen the set screw (22) and use the handle (1) to angle the machine head (4) to the left, until the
pointer (19) indicates the desired angle measurement on the scale (18).

Re-tighten the set screw (22).

Cut as described in section 7 .3.
7.7 MITRE CUT 0°- 45° AND TURNTABLE 0°- 45° (FIG. 2/4/12)
The crosscut, drag and mitre saw can be used to make mitre cuts to the left of 0°- 45° in relation to the work face and, at
the same time, 0° - 45° to the left or 0° - 45° to the right in relation to the stop rail (double mitre cut).
Attention! For mitre cuts (inclined saw head), the left side of the moveable stop rails (16a) must be fixed in the outer
position.