Feider Machines FSOR17210, Руководство пользователя

Страница: 15 / 29

15
The equipment is to be used only for its prescribed purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the manufacturer will be liable for any damage or injuries of any kind
caused as a result of this.
The equipment is to be operated only with suitable saw blades. It is prohibited to use others type of cutting
off wheel.
To use the equipment properly you must also observe the safety information, the assembly instructions and
the operating instructions to be found in this manual.
All persons who use and service the equipment have to be acquainted with this manual and must be in
formed about the equipment’s potential hazards. It is also imperative to observe the accident prevention
regulations in force in your area. The same applies for the general rules of health and safety at work.
The manufacturer will not be liable for any changes made to the equipment nor for any damage resulting
from such changes.
Even when the equipment is used as prescribed it is still impossible to eliminate certain residual risk factors.
The following hazards may arise in connection with the machine’s construction and design:

Contact with the saw blade in the uncovered saw zone.

Reaching into the running saw blade (cut injuries).

Kick-back of workpieces and parts of workpieces.

Saw blade fracturing.

Damage to hearing if ear-muffs are not used .

Harmful emissions of wood dust when used in closed rooms.
Please note that our equipment has not been designed for use in commercial, trade or industrial applications.
Our warranty will be voided if the equipment is used in commercial, trade or industrial businesses or for
equivalent purposes.
6. BEFORE STARTING THE EQUIPMENT
Open the packaging and remove the device carefully.

Remove the packaging material as well as the packaging and transport bracing (if available).

Check that the delivery is complete.

Check the device and accessory parts for transport damage.

If possible, store the packaging until the warranty period has expired.
ATTENTION:
The device and packaging materials are not toys! Children must not be allowed to play with plastic
bags, film and small parts! There is a risk of swallowing and suffocation!

The equipment must be set up where it can stand securely. Secure the machine on a workbench or a
base frame with 4 screws (not included in delivery) using the holes on the fixed saw table (15).

Pull out the pre-installed tilt protection (37) completely and secure it with an Allen key (D).

All covers and safety devices have to be properly fitted before the equipment is switched on.

It must be possible for the blade to run freely.

When working with wood that has been processed before, watch out for foreign bodies such as nails or
screws, etc.

Before you press the ON/OFF switch check that the saw blade is fitted correctly. Moving parts must run
smoothly.

Before you connect the equipment to the power supply make sure the data on the rating plate are