ORIGINAL INSTRUCTIONS > EN
Handle
1.
Place the handle over the mounting channel on the frame
2.
Secure the handle to the frame using the two flange bolts(M8x45)
3.
Place a flange lock nut on the end of each bolt and fasten seurely. DO NOT over tighten the flange
lock nuts
Connect the Battery
1. Remove the protective cover from the red (+) lead on the battery.
2. Attach the red (+) lead to the red (+) terminal on the battery with the cap screw (M5x10) and secure with
the nut (M5).
3. Repeat steps 1-2 for the black (-) battery lead.
Add Engine Oil
CAUTION
: DO NOT attempt to crank or start the engine before it has been properly filled with the
recommended type and amount of oil. Damage to the generator as a result of failure to follow these
instructions will void your warranty.
NOTE:
The generator rotor has a sealed, pre-lubricated ball bearing that requires no additional lubrication for the
life of the bearing.
09
