ORIGINAL INSTRUCTIONS > EN
NOTE
:
Recommended oil type is 10W-30 automotive oil.
1. Place the generator on a flat, level surface.
2. Remove oil fill cap/dipstick to add oil.
3. Add 0.6L of oil and replace oil fill cap/dipstick.
DO NOT OVERFILL.
4. Check engine oil level daily and add as needed.
NOTE:
Once oil has been added, a visual check should show oil about 1-2 threads from running out of the fill hole.
If using the dipstick to check oil level, DO NOT screw in the dipstick while checking.
CAUTION
The engine is equipped with a low oil shut-off and will stop when the oil level in the crankcase falls below
the threshold level.
NOTE:
We consider the first 5 hours of run time to be the break-in period for the unit. During the break in period
stay at or below 50% of the running watt rating and vary the load occasionally to allow stator windings to
heat and cool. Adjusting the load will also cause engine speed to vary and help seat piston rings. After the
5 hour break-in period, change the oil
10
