21
CX SERIES Installation, Operating & Maintenance Manual
INST
ALLER
PROGRAMMING
1.
On the main page, tap the three horizontal
line button in the upper left corner.
2.
On the menu that comes up, select
“Date\Time”.
3.
Adjust the date and time as necessary.
4.
Press the “OK” button to return to the main
page.
5.
Repeat step 1, and select “Temp Setting”.
6.
Adjust the set temperature as necessary.
7.
Press the “OK” button to return to the main
page.
8.
Repeat step 1, and select “Start\Stop Time”.
9.
There are 7 available settings, which can be
toggled through using the arrows on the upper
right. For each desired setting, select the days
which is applies to and the start and stop time
on those days.
Note:
These times act as triggers rather than
ranges of operation. The generator will start up
when the next set “start time” is.
Note:
If two settings have overlapping times,
the setting with the lower number will be used.
10.
Once all settings have been entered, press the back button in the lower left corner.
11.
If you would like the system to start immediately, press "Manual Start" button on the main page. It
will run until the next "Stop Time" preset.
!
!
