20
CX SERIES Installation, Operating & Maintenance Manual
INST
ALLER
IP ADDRESS ASSIGNMENT
Each generator needs to be assigned an IP address by the CONTROL.
Single Generator System
1.
Take the provided ethernet cable and connect
it to the ethernet port on the right side of the
generator as well as the ethernet port on the
bottom of the CONTROL.
2.
Power on both the generator and the
CONTROL.
3.
When the CONTROL powers up, it will tell you
that at least one steam unit is offline
4.
Click on “Steam Unit 1”.
5.
On the window that pops up, click on
“
CONTINUE
”.
6.
The CONTROL will reboot.
Multi-Generator System
1.
Take one of the provided ethernet cables and connect it to the ethernet port on the right side of the first
generator as well as the ethernet port on the router.
2.
Take another of the provided cables and connect it to the ethernet port on the bottom of the CONTROL as
well as another ethernet port on the router.
3.
Power on both the generator, the CONTROL, and the router.
4.
When the CONTROL powers up, it will tell you that at least one steam unit is offline.
5.
When the CONTROL powers up, use the buttons at the bottom of the screen to select the total number of
generators in this system.
6.
click on the first offline “Steam Unit” button.
7.
On the window that pops up, click on
“CONTINUE”.
8.
The CONTROL will reboot.
9.
While the CONTROL is rebooting, connect the
next generator to the router using another
ethernet cable and turn on power to that
generator.
10.
Repeat steps 6-9 until all the CONTROL is
rebooting and
all generators have been connected.
