Federal Signal Corporation SmartSystem SS2000C31, Инструкции по эксплуатации и настройке

Страница: 8 / 24

-6-
MAIN MENU
Entering
Configuration Mode
To enter configuration mode, simply
execute the following steps:
1. Power up the system and wait
for startup to finish.
2. Unplug control head.
3. Press SAVE and continue to hold.
4. Plug control head back in while
continuing to hold SAVE.
5. Release the SAVE key.
The “MAIN MENU” will come up on
the keyboard as soon as you enter
configuration mode. Keys 10, 11, 12,
13, and 14 buttons will be solidly il-
luminated.
At this point you have six choices:
• SAVE
• ENTER LEVEL 1
• ENTER LEVEL 2
• ENTER LEVEL 3
• ENTER LEVEL 4
• ENTER LEVEL 5
Pressing “SAVE” (Key 9) will save
the present configuration to perma-
nent memory, end the configuration
session, and put the system into op-
eration mode.
LEVEL 1
Pressing “LEVEL 1” (Key 10) will
enter LEVEL 1 (Keyboard). If
LEVEL 1 is selected, go to page 7,
LEVEL 1 (Keyboard).
LEVEL 2
Pressing “LEVEL 2” (Key 11) will
enter LEVEL 2 (Keys). If LEVEL 2
is selected, go to page 8, LEVEL 2
(Keys).
LEVEL 3
Pressing “LEVEL 3” (Key 12) will
enter LEVEL 3 (Power Up). If
LEVEL 3 is selected, go to page 14,
LEVEL 3 (Power Up).
LEVEL 4
Pressing “LEVEL 4” (Key 13) will
enter LEVEL 4 (Horn Ring). If
LEVEL 4 is selected, go to page 15,
LEVEL 4 (Horn Ring).
LEVEL 5
Pressing “LEVEL 5” (Key 14) will
enter LEVEL 5 (Load Management).
If LEVEL 5 is selected, go to page
16, LEVEL 5 (Load Management).
Always leave the
Slide Switch OFF
while
reconfiguring.
SmartSystem-LMS
LEVEL 1 SAVE
LEVEL 2
LEVEL 3 LEVEL 4 LEVEL 5
9 10 11 12 13
14
15 16
4 5 6 7 8
20 19 17 18
290A4318-02
OFF 1 2 3