Federal Signal Corporation SmartSystem SS2000C31, Инструкции по эксплуатации и настройке

Страница: 12 / 24

-10-
LEVEL 2 - Slide Switch - Function
Level 2 - Slide Switch - Function, is
where the slide switch position just
selected is configured. All relays can
be configured to come on with the
switch as well as Horn Ring Trans-
fer and Siren Enable.
SAVE
Pressing the SAVE key will save
what is displayed and you will re-
turn to Level 2 - Slide Switches, page
9.
Aux Relays
Any combination of Auxiliary relays
can be configured to activate with
the Slide Switch position being
reconfigured. Simply turn on (or
turn off) the desired Aux Relay Keys
as labeled above.
Relays 1, 2, & 3
Any combination of Relays 1, 2, and/
or 3 can be configured to activate
with the Slide Switch position being
reconfigured. Simply turn on (or
turn off) the desired Relay Keys as
labeled above.
Horn Ring Transfer
The Horn Ring Transfer can be con-
figured to automatically turn on
with the Slide Switches. To do so,
turn on Key 15, Horn Ring Trans-
fer.
Siren Enable
If sirens are configured to be depen-
dent on the slide switch, this is
where you enable the siren. If you
want the siren to be enabled for the
slide switch position you are config-
uring, just turn on the Siren Enable
key, key 16.
Directional Light Warn
1-4
If a directional light Warning Pat-
tern is desired to activate with the
slide switch being programmed, just
turn on the appropriate key for the
warning pattern you need. If no
warning pattern is needed, turn off
all directional light Warn keys.
Always leave the
Slide Switch OFF
while
reconfiguring.
SmartSystem-LMS
SAVE
Relay 2
9 10 11 12 13
14
15 16
4 5 6 7 8
20 19 17 18
Siren
Enable
Relay 3
Horn Ring
Transfer
Enable
Relay 1
Directional
Light
Warn - 3
Directional
Light
Warn - 4
Directional
Light
Warn - 1
Directional
Light
Warn - 2
Aux. Relay
A
Aux. Relay
B
Aux. Relay
C
Aux. Relay
D
Aux. Relay
E
290A4318-06
OFF 1 2 3