![background image](http://html1.mh-extra.com/html/federal-signal-corporation/smartsiren-platinum-ssp2000b/smartsiren-platinum-ssp2000b_installation-and-maintenance-instructions-manual_3815024042.webp)
Chapter 5: Mounting the Siren and Control Pad
SmartSiren Platinum Convergence Network
42
3.
Use the mounting bracket as a template and scribe two drill position marks at the selected
mounting location.
Figure 5.2
Bracket attached to back of control head
NET
WORK
CONNECT
ION
ONL
Y!
A
NON-NET
WORK
CONNECT
ION
WI
LL
RESUL
T I
N
DAMAGE
TO
DEVI
CES.
DO
NOT
CONNECT
T
O
PC.
Fo
r fu
rth
er
in
fo
rmati
on
see
in
stru
cti
on
s
or
cal
l 1-800-433-9132.
PC
CONNECT
ONLY
!
WARNING
290A7561
CONTROL PAD
BRACKET (1 OF 2)
NOTE: USE ONE OF THE THREE
SETS OF HOLES IN THE PIVOT
BRACKET TO BEST POSITION
THE CONTROL PAD.
#6-32 x 1/4" SCREW,
PHL. PAN HD (2)
PEM-NUT (ATTACHED
TO BRACKET)
#6 SPLIT LOCK WASHER (2)
4.
Drill two pilot mounting holes at the drill position marks.
5.
Secure the mounting bracket to the mounting surface with the #10 thread-forming screws
(Figure 5.3).
6.
To adjust the angle of the control head, loosen the hinge screws, tilt the control head forward or
backward, then securely tighten the screws.
Figure 5.3
Brackets attached to control head and mounting surface
NET
WORK
CONNECT
ION
ONL
Y!
A NON-NET
WORK
CONNECT
ION
WI
LL
RESUL
T I
N
DAMAGE
TO
DEVI
CES.
DO
NOT
CONNECT
T
O
PC.
Fo
r fu
rth
er
in
fo
rmati
on
see
in
stru
cti
on
s
or
cal
l 1-800-433-9132.
!
WARNING
290A7562
PILOT HOLES (2)
PEM-NUTS (ATTACHED TO BRACKET)
BRACKET (2 OF 2)
MOUNTING SURFACE
MOUNTING HOLES
#10 SCREW,
THREAD-FORMING (2)
1/4-20 x 3/4" HINGE SCREW,
HEX HEAD (2)
1/4" LOCK WASHER,
EXT. TOOTH (2)
PC
CONNECT
ONLY