![background image](http://html1.mh-extra.com/html/federal-signal-corporation/smartsiren-platinum-ssp2000b/smartsiren-platinum-ssp2000b_installation-and-maintenance-instructions-manual_3815024031.webp)
Chapter 3: Wiring the Convergence Network
SmartSiren Platinum Convergence Network
31
Radio Rebroadcast (Cable Assembly 17500307)
To allow incoming two-way radio messages to be amplified by the siren amplifier/relay module
and rebroadcast over the siren speakers, connect the brown 18 AWG two-conductor zip-cord
across the speaker of the two-way radio (Figure 3.13). Insulate spliced leads with twist-on wire
connectors. Fold and seal unused leads. For instructions on adjusting the gain, see “Setting the
Gain for Radio Rebroadcast” on page 37.
Figure 3.13
Connections for radio rebroadcast
BROWN ZIP
CORD
TWO-WAY
RADIO
BROWN ZIP
CORD
RADIO
SPEAKER
18 AWG
RADIO
RING
SPKR
RADIO
HORN
SPKR
SERIAL PORTS
10 8 6 4 2
9
5
7
3 1
AUX
2 3
3
4
4
5 6 7 8
1
11 1 1 1 1
2
2 3 4
AUX
PARK
INPUT
+12V
+
P
RADIO
RING
SPKR
DO NOT EXCEED 5 AMPS
MAXIMUM ON HORN RING
CIRCUIT. SEE INSTALLATION
INSTRUCTIONS
RADIO
RING
SPKR