![background image](http://html1.mh-extra.com/html/federal-signal-corporation/smartsiren-platinum-ssp2000b/smartsiren-platinum-ssp2000b_installation-and-maintenance-instructions-manual_3815024018.webp)
Chapter 3: Wiring the Convergence Network
SmartSiren Platinum Convergence Network
18
Overview of the Convergence Network Connections
The Convergence Network system has these types of connections via cables and locking connectors
included with the kit (see Figure 3.3):
Connections for the siren amplifier/relay module:
◆
Three “plug and play” serial ports that communicate on the Federal Signal Convergence network
with the control head, compatible lightbars, and the Federal Signal Model 660100 Relay Module/
Two-Channel Flasher.
◆
Seven to ten 10 A auxiliary solid-state relays (cable assembly 1751541)
◆
Four low-current auxiliary solid-state relays and a Park Input circuit (cable assembly 1751542-01
or 1751542-NY)
◆
SignalMaster directional warning lights (cable assembly 1751542-01, SSP3000B only)
◆
Four auxiliary relay inputs (cable assembly 1751542-01 or 1751542-NY)
◆
Speakers and a horn ring circuit (cable assembly 17500307)
◆
Power terminals for negative ground and positive 12 Vdc
Connections for the control head:
◆
Four active-low input circuits that activate when pulled to ground. They can be configured to
operate with the SSP3000B system control head or with the switches on the steering wheel of the
Ford Police Interceptor.
◆
Connections to the siren for battery ground (-GND) and +12 Vdc switched by ignition
◆
Connection for the Federal Signal public address microphone (P/N 258B577-03)
◆
Convergence Network 25-foot cable that connects the control head to the siren amplifier
(1751532)
◆
Optional ignition input to run long timers
For installation details, see pages 20 through 36.
For instructions on configuring the operation of the devices connected through the Convergence
Network, see the “Converrgence Configuration Software Manual” P/N 2562418.