![background image](http://html.mh-extra.com/html/federal-signal-corporation/pagasys-gen-ii-p-sys-g/pagasys-gen-ii-p-sys-g_description-installation-operations-and-maintenance-manual_548461054.webp)
54
I/O and Terminal Block Cards
PAGASYS GEN II (P-SYS-G)
Federal Signal www.fedsig.com
The P-AADCx-G cards are connected to the Amplifier Chassis audio power connectors
through amplifier audio out cable assemblies. There are several versions of the amplifier
audio out cable assemblies, which vary in cable length to accommodate the differing
Amplifier Chassis mounting location within the Cabinet. These cable assemblies have a
16-pin connector receptacle at one end for connection to Amplifier Chassis audio power
connectors and two, 8-pin connector receptacles at the other end for connection to a
P-AADCx-G card. Each 8-pin receptacle connector carries the 100 V audio output signals
of two amplifiers.
NOTE
: The service models for the Amplifier Audio Distribution cards are
K-P-AADCx-G, where x represents the number of speaker loop circuits per amplifier.
Figure 29 P-AADC1-G and P-AADC1-G-01 Cards
Figure 30 P-AADC2-G and P-AADC2-G-01 Cards