Federal Signal Corporation PAGASYS GEN II P-SYS-G Скачать руководство пользователя страница 112 | Manualshive

Страница: 112 / 136

background image

112

Control Panel Designer

PAGASYS GEN II (P-SYS-G)

Federal Signal www.fedsig.com

13.1.1 Configuring a new Access Panel Button

To configure a new Access Panel button:
1. Go to the item select list under equipment tree, select Access Panel Button, and select

Add to add the new Access Panel Button.

2.  Select the new Access Panel Button and configure an available Button ID.
3.  In the Name box, type a name.
4.  In the Comments box, type a comment.
5.  From the Settings section, click the Sense arrow: typically Normally Open/NDE.
6.  From the Settings section, click the Mode arrow: typically Toggled.
7.  From the Visibility section, set Visibility desired.
8.  From the Input-Function section, set the Function values. Function for a typical

alarm broadcast button are input_channel_bcast_req_fixed_zones or input_channel_

bcast_req_variable_zones, which differ in how output zones are selected.

9. In the Parameters section, under the Broadcast ID tab, in the Broadcast box, select

the broadcast (use the ID for the new broadcast).

10. In the Parameters section, under the Zone List tab, in the Broadcast box, select the

zone.

13.1.2 Creating the new Access Indicator for the Access Panel Button

To create a new Access Panel Indicator for the Access Panel Button that was created

using the System Manager software:
1. Select Configuration > Equipment.
2. From the list, scroll to Soft Panel/Access Panel 33. With the access panel selected,

Add a new Access Panel Indicator.

• Go to the item select list under equipment tree, select Access Panel Indicator, and

select the Add button to add the new Access Panel Indicator

• Select the new Access Panel Indicator and configure an Indicator ID that matches

the Button ID for the new Access Panel Button. Give the indicator a Name,

Scope, and set Output-Function to indicator_simple.

3. Access the Access Panel Button associated with this indicator, and add a connection

under Connection-Output to drive the Access Panel Indicator under the State tab.

4. If a Lamp Test option is available on the system, access the Lamp Test button on the

soft access panel, and add this new Access Panel Indicator to the list of Connection-

Outputs

«
...
110
111
112
113
114
...
»

Содержание PAGASYS GEN II P-SYS-G









































































































































Отзывы:

Нет отзывов

Похожие инструкции для PAGASYS GEN II P-SYS-G

Бренд: RadiaCode Страницы: 42

Бренд: Samsung Страницы: 40

Бренд: PartyFunLights Страницы: 4

Бренд: jablotron Страницы: 16

Бренд: RainWater Harvesting Страницы: 3

Бренд: PRODIS Страницы: 12

Motion Sensor Alarm

Бренд: Tiiwee Страницы: 35

Бренд: usi Страницы: 10

Бренд: Insignia Страницы: 28

Бренд: ACTi Страницы: 2

Picomig 305 D2 puls

Бренд: EWM Страницы: 84

Бренд: Qlight Страницы: 12

Бренд: Eldes Страницы: 8

Бренд: Nexxt Страницы: 10

Бренд: O-SO Pure Страницы: 16

Бренд: Ubiquiti Страницы: 24

Бренд: Q-See Страницы: 2

Бренд: M-E Страницы: 36

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды