![background image](http://html.mh-extra.com/html/federal-signal-corporation/pagasys-gen-ii-p-sys-g/pagasys-gen-ii-p-sys-g_description-installation-operations-and-maintenance-manual_548461128.webp)
128
Installing Hardware Access Panel
PAGASYS GEN II (P-SYS-G)
Federal Signal www.fedsig.com
When the hard access panel is cloned from another panel, the buttons and indicators
for the new access panel are available on the System Manager equipment tree. In this
example, hard access panel 1. The user will need to configure the Buttons and Indicators
attributes (Function, Broadcasts, Zone selections, and Input/Output Connections) to use
the access panel.
To configure the new hard access panel:
1. Select Configuration > Equipment > Hard Panel. Select the new Access Panel just
created.
2. See the General Alarm example that follows is fully configured. Use the existing soft
access panel attributes to define new access panel configuration.
3. File > Upload Config to Controller to upload the access panel to the system
controller.
4. File > Restart Controller to restart the system controller to implement the new
configuration.