FDomes GLAMPING 20, Инструкция по сборке

Страница: 48 / 53

48
Dome
WITHOUT
the skylight window
1. Start the installation of the Alum Air Insulation from Level 1 and work your way down.
2. Install all panels on Level 1 before installing the level below.
3. Once level 1 is complete, move to Level 2. The top of Level 2 will overlap the bottom of Level 1. Pay
attention to the correct positioning of the panels - panels with ventilation openings need to be in line with
the vents in the dome cover.
4. Once complete, move to Level 3. Undo the bottom bolts from Level 2 and place the next layer of insulation
on top of the previously installed level 2. The top of level 3 will overlap the bottom of level 2. Pay attention
to the correct positioning of the panels - panels with porthole openings need to be in line with the
porthole openings in the dome cover.
5. Repeat the process until you finish with Level 5.
Alum-Air Insulation
Level 2
Level 3
Level 2
Level 3
Level 4
Level 5
Drawing 27
Alum Air Insulation Cross Section
- Dome without Skylight Window