150cm Light Up Acorn Garland
H586
v001: 15/02/21
Please read and retain these instructions for future reference
Always position in direct sunlight
ASSEMBLY INSTRUCTIONS / INSTRUCTIONS FOR USE:
Unpack the components carefully. Please check all parts have been removed from the packaging.
Find an ideal Place for the Solar Light.
Place the solar light in an area where it will receive direct sunlight for at least 8 hours per day. The number of
hours the light will illuminate is directly proportional to the hours of sunlight it receives. If the light is placed
in a shaded area, it will not be able to fully charge and its illumination time will be limited. Do not place the
light near other outdoor lighting like porch or streetlights. These may fool the sensor and keep the light from
coming on, or cause it to turn off automatically
IMPORTANT:
1.
Install the solar light in an area where it can get direct sunlight.
2.
Leave the button in the “ON” position.
Dimensions
Length: 150cm
Battery: 1x Ni-MH AA 600mAh 1.2V
9 x Warm White LED Lights (not replaceable)
CHARGING AND OPERATION:
1.
Firstly, press down button which is on the backside of the solar
panel to “ON” position for charging and charge by
placing it in
direct sunlight for at least 8 hours. Secondly, press down the
button again to “OFF” position, the light will be off and stop
charging.
2.
The light will work automatically after first pressing the button.
It will charge in direct sunlight during the day time and
illuminate at night.
NOTE: In order to check the solar function, firstly press down the
button; then place the solar panel in the sunlight; finally, cover the
solar panel with your hand and light should turn “ON”
automatically.
ON/OFF
