Fayat Dynapac F80W, Руководство по эксплуатации

Страница: 70 / 198

64 F80W
2.4 Machine description
Screed heating switch (13)
It is used for turning on the screed gas heating.
• Upper position – turned ON
• Lower position – turned OFF
Paving speed selector (14)
Active only in the operating mode. The maximum speed in the
operating mode is 0.6 km/h (0.37 MPH).
Transport/operating mode switch (15)
• Transport mode ("rabbit")
- The material feed function to augers, vibration and
screed lowering functions cannot be activated.
- The maximum travel speed forward and backward is
2.5 km/h (1.55 MPH).
• Operating mode ("turtle")
- The material feed function to augers, vibration and
screed lowering functions can be activated.
- The maximum travel speed forward is 0.6 km/h
(0.37 MPH).
- The machine backward travel function cannot be acti-
vated in the operating mode.
Selector switch of the material delivery
operating mode – MAN/AUT (17)
• AUT – automatic mode of material delivery
- the machine moves in the operating mode.
• MAN – manual mode of material delivery
- turn over the conveyor direction switch (18) to the lower
position (opposite the machine travel).
Conveyor and auger direction switch (18)
It serves for the operation of the material conveyor and augers.
The function is only active in the operating mode.
• Upper position – reversing
• Central position – no material distribution
• Lower position – material distribution active
Screed lift/lower switch (19)
Toggle switch with 3 positions:
• Position up (without arresting): lifts the screed.
- Set the travel controller to the neutral position.
- Set the maximum engine speed.
• Central position (with arresting): screed lock; the screed will
stay in its current position.
• Position down (with arresting): lowers the screed and the
floating function.
- Floating position – active only during travel of the ma-
chine in the operating mode.