Fayat Dynapac F80W, Руководство по эксплуатации

Страница: 152 / 198

146 F80W
D451195
3
D451122
2
1
D451195C
4
5
3.6 Lubrication and maintenance operations
Every 50 hours (week)
3.6.12 Cleaning the water separator
Clean the water separator when the machine is parked on a flat
and solid surface, the engine and the battery disconnector are
off and the gas bottle is closed.
Water separator cleaning procedure:
• Open the engine bonnet (1).
• Open the left material hopper side cover (2).
• Place a transparent drain container resistant to engine fuel
under the water separator (3).
• Hold the water separator (3) with a spanner by the nut (4).
• Loosen the water separator drain screw (5) with a screwdriv-
er (about 3 – 4 turns) until the liquid starts to flow out.
• Check if there is a dividing line in the drain container be-
tween the condensed water (bottom) and engine fuel (top).
• When clean engine fuel flows out, firmly hold the water sep-
arator (3) by the nut (4) with a spanner and tighten the water
separator drain screw (5).
• Close the left material hopper side cover (2).
• Close the engine bonnet (1).
Caution! When draining the condensate, fuel can come in
contact with hot parts of the engine and catch fire.
There is a risk of burns from the hot parts of the engine.
Clean the water separator when the machine is parked
on a flat and solid surface, the engine and the battery
disconnector are off and the gas bottle is closed.
When cleaning the water separator, do not smoke. There
is a risk of fire.
When cleaning the water separator, wear the prescribed
protective equipment.
After cleaning the water separator check the tightness.
In case of detecting water condensation in the fuel tank,
perform the separator cleaning procedure earlier.
Stop the fluid soaking into the ground.