Fayat Dynapac F80W, Руководство по эксплуатации

Страница: 27 / 198

21 F80W
2
3
451090A
43
44
51
52
451091A
SPECIFICATION MANUAL
Setting the paving width
Procedure for setting the required paving width on the left
side of the screed:
To increase the paving width on the left side, turn the paving
width switch (2) to the left and hold it.
To release the paving width switch (2), lock it back to the middle
position and the screed stops in the required position.
To decrease the paving width on the left side, turn the paving
width switch (2) to the right and hold it.
To release the paving width switch (2), lock it back to the middle
position and the screed stops in the required position.
Check the required setting of the paving width on the left side
by checking the position on the left paving width indicator (51).
Procedure for setting the required paving width on the right
side of the screed:
To increase the paving width on the right side, turn the paving
width switch (3) to the right and hold it.
To release the paving width switch (3), lock it back to the middle
position and the screed stops in the required position.
To decrease the paving width on the right side, turn the paving
width switch (3) to the left and hold it.
To release the paving width switch (3), lock it back to the middle
position and the screed stops in the required position.
Check the required setting of the paving width on the right side
by checking the position on the right paving width indicator
(52).
Note
In case of a failure contact your dealer or DYNAPAC Technical
Support.
There is a risk of injury from the falling screed.
When working on the screed, the screed must be lifted at
its highest position and locked.
Before lifting the screed, make sure that there are no
persons or objects in the dangerous area.
Danger of injury. Do not reach in rotating parts.
Risk of burn. The screed and augers are hot.
Use personal suitable protective equipment.
When setting the required screed width, no one is al-
lowed in the hazardous area of the machine.
There is a risk of injury from the movement of the screed
extensions. The safe distance from the machine is at least
5 m.