Fayat Dynapac F80W, Руководство по эксплуатации

Страница: 140 / 198

134 F80W
451115A
3
D451116
1
MAX
MIN
2
19
15
8
451087B
P
0
R
F 8
3.6 Lubrication and maintenance operations
3.6.3 Hydraulic oil check in the hydraulic tank
Before checking the level of hydraulic oil, lower the screed all
the way down and aim the front wheel straight so that hydraulic
oil can flow back into the hydraulic oil tank.
Ensure that the machine is standing on a level and firm surface.
Start the engine.
Lower the screed to the lower position using the switch (19) on
the main dashboard.
Turn off the engine.
Oil level check procedure:
• Check the oil level on the oil gauge (2).
• The hydraulic oil level must be between the MIN and MAX
marks.
Hydraulic oil refilling procedure:
• Open the right material hopper side cover (1).
• Take off the ventilation filter (3) from the filler neck.
• Refill the necessary hydraulic oil quantity according to
Chapter 3.2.3.
• Mount the ventilation filter (3) back in place.
• After refilling the oil check the oil quantity in the hydraulic
tank on the oil gauge (2).
• Close the right material hopper side cover (1).
Wear suitable protective goggles, protective clothing
and footwear.
Thoroughly wash areas on the body that have been in
contact with hydraulic oil.
Do not inhale hydraulic oil vapours.
The oil level must always be visible in the oil gauge!
Refill with the specified hydraulic oil according to
Chapter 3.2.3
In case of large oil losses, find out the cause of leakage of
the hydraulic system (leakage of screwed hose connec-
tions, hydraulic generators, hydraulic motors etc.) and
remedy the defects.
Caution! The hydraulic oil level must always be between
the MIN and MAX marks on the oil gauge.
Stop the oil soaking into the ground.