Fayat Dynapac F80W, Руководство по эксплуатации

Страница: 145 / 198

139 F80W
451199
1
2
3
4
451802
11
12
13
24
451064G
MAINTENANCE MANUAL
There is a risk of explosion.
Do not smoke during machine operation. There is a risk
of explosion or fire. Liquid gas can easily ignite.
The machine must be equipped with a fire extinguisher.
Have the fire extinguisher ready on the driver's stand at
a place intended for this purpose.
Pay extra attention to potential gas leaks
and in doubts,
shut off the gas supply.
Check the tightness of the gas equipment, e.g. with a gas
leak detector.
If you detect gas leakage, immediately shut off the
gas bottle shut-off valve and have the gas equipment
repaired by an authorised service plant or qualified
personnel.
Follow safety regulations for handling gas bottles.
There is a risk of burns. Use protective equipment.
Have the test and maintenance of spark plugs performed
by an authorised service plant or qualified personnel ac-
cording to the procedure given below.
Spark plug function test:
• Insert the key into the ignition box (11) in the position “0”
and switch over to the position “I”.
• Set the key between position “I” and “II” and the engine
glowing indicator lamp (24) will light up.
• Do not perform engine glowing for more than 15 s.
• Use the alarm horn (12) to signal that the engine is starting.
• Turn the key to position “II” to start the engine.
• Secure the screed against free fall.
• Set the maximum paving width on both sides of the machine.
• Turn the key in the ignition box (11) from position “II” to po-
sition “I”. The engine switches off.
• Close the gas bottle shut-off valve.
• Switch on the gas screed heating system by moving the
switch (13) to the upper position.
• Test the spark plugs for sparking and correct sending of the
signal pulse.
• Switch off the gas screed heating system by moving the
switch (13) to the lower position.
• Turn the key to the “0” position.
• Disconnect the battery disconnecter.