Fayat BOMAG BVP 10/36 Скачать руководство пользователя

Страница: 84 / 112

CAUTION!
Danger of injury caused by uncontrolled

machine movement!

–

Always hold on to a running machine.

–

Always keep an eye on a running machine.

Protective equipment:

Working clothes

Hearing protection

Safety shoes

Special tool:

Sirometer

Park the machine on a rubber mat.

Start the engine

Chapter 6.2 „Starting the

engine“ on page 55

Run the machine at maximum speed for one minute.

Check the base plate’s frequency with a suitable measuring

instrument (e.g. Sirometer).

Nominal value:

Chapter 2 „Technical

data“ on page 11

Park the machine safely

Chapter 6.5 „Parking the machine

in secured condition“ on page 62

If frequency incorrect:

Check the engine speed.

Check the V-belt.

If necessary, contact our customer service.

8.8.4 Cleaning the slurry filter and fuel strainer

DANGER!
Danger to life caused by explosive gas-air

mixes!

–

Do not allow gasoline to come into contact with

hot components.

–

Smoking and open fire is prohibited.

–

Keep away from heat sources, sparks and

other sources of ignition.

–

Do not spill any gasoline.

Protective equipment:

Working clothes

Protective gloves

Park the machine in secured condition

Chapter 6.5

„Parking the machine in secured condition“ on page 62

Allow the engine to cool down.

Maintenance – Annually

BVP 10/36

Содержание BOMAG BVP 10/36

















































































































Результаты поиска

Содержание BOMAG BVP 10/36

Отзывы:

Похожие инструкции для BOMAG BVP 10/36

Бренды по названию

Популярные бренды

Fayat BOMAG BVP 10/36, Инструкция по эксплуатации

Результаты поиска

Содержание BOMAG BVP 10/36

Отзывы:

Похожие инструкции для BOMAG BVP 10/36

Бренды по названию

Популярные бренды